The planet 22x can be powered either via an included 12V DC power supply or via the network cable as a PoE (Power over Ethernet) device. This makes it possible to use the interface even when there is no power outlet close by.
1.1 Performance features Figure 1: planet 22x Front HI-Z XLR Function TRS Function +48V switch LINE LINE must be OFF optional ON HI-Z must be OFF must be OFF Table 2: Input select for input 1 and 2 LINE INPUT 1 1.
Page 6
13. Headphone output: 1/4" TRS audio jack. 14. On/Off switch. 15. H.P.-volume controller: controls the output level of the headphones. Figure 2: planet 22x Rear Network and Power section 1. Kensington Lock: If required, this connects your unit to a standard laptop lock connector, preventing it from being stolen.
Controller software. For this you must connect a "Dante Receiver" with a "Dante Trans- mitter". For example to receive the physical channel 1 of the planet 22x at the channel 1 of your Virtual Audio Soundcard, you must connect the Transmitter "planet22x LEFT...
Page 8
The other way round, if you want to transmit the signal from channel 1 of your Virtual Audio Soundcard to the physical channel 1 of your planet 22x, you need to connect the "Transmitter Controller-PC 01" with the "Receiver" "planet 22x LEFT 1".
Input voltage range 36V to 57V Maximum Output Power: 12W 5 General Information Trademarks ESI, planet 22x are trademarks of ESI Audiotechnik GmbH. Windows is a trademark of Microsoft Corporation. Dante and Audinate are registered trademarks of Audinate Pty Ltd. Other product and brand names are trademarks or registered trademarks of their respective companies.
Need help?
Do you have a question about the PLANET 22X and is the answer not in the manual?
Questions and answers