GIGAPort AG 1. Introduction Congratulations on your purchase of the ESI GIGAPort AG. GIGAPort AG is a USB audio interface, that provides 8 analog output channels and a stereo digital output. It is very easy to use, small and powerful. With our ASIO driver support GIGAPort AG works perfect with all current recording and sequencer applications.
GIGAPort AG 2. Installation System Recommendation GIGAPort AG is not simply a standard digital audio interface card, but a high-resolution device capable of advanced processing of audio content. Even though GIGAPort AG is built to have low- CPU resource dependability, system specifications play a key part in the GIGAPort AGs performance.
Page 6
The procedure is similar with other versions of Windows. Installation under Windows XP Unplug the device before you start the installer. Then launch setup.exe from the ESI/GIGAPort AG folder of the included driver CD or from a download of a recent driver from our website. You can select the language used for installation, then the following dialog appears: Choose Install the driver.
Page 7
GIGAPort AG The installer will instruct you to plug-in the USB device to the computer. The detection can always take a moment. If you are told to do so like seen above, please unplug the device again, before you will be told to plug it in again.
GIGAPort AG The completion of the installation can be confirmed on the screen above with Exit. Congratulations! You have now completed the installation of the spezial ASIO driver successfully and the installation of GIGAPort AG has been completed now. With the installer, you can also remove the driver again. If you want to do that, launch setup.exe again and then choose the option Uninstall the driver.
GIGAPort AG Under Devices you can select the Samplerate. In the Ditherung area, the record resolution can be selected. An important setting is under System performance, it covers the output latency that is critical for many applications such as software synthesizers. Reason Launch Reason and go to Edit >...
GIGAPort AG Reaktor Launch Reaktor and go to System-Menu > Audio Settings. Select the GIGAPort AG ASIO Driver in the device selection list. Fruity Loops Launch Fruity Loops and go to Options > Audio settings. Then select the GIGAPort AG ASIO Driver for output.
GIGAPort AG Traktor Launch Traktor. Go to Setup > Audio and select the GIGAPort AG ASIO Driver as device. BPM Studio Launch BPM Studio and go to Options > Audio I/O. Select the GIGAPort AG ASIO Driver and then assign the individual output channels. Please note that BPM Studio also works with GIGAPort AG when the ASIO-Treiber has not been installed and only the standard functionality from Windows is available for USB audio devices.
GIGAPort AG 4. Specifications 1. Interface - USB spec version 1.1 - USB audio class spec version 1.0 2. Output Type - analog 8 channel output (RCA jack) - digital 2 channel output optical mini jack - headphone output (3.5mm mini jack) 3.
If necessary, consult an experienced radio/television technician for additional suggestions. Correspondence For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at www.esi-audio.com. Disclaimer All features and specifications subject to change without notice.