Advanced Chipset Setup - ECS IC890GXM-A Manual

ECS eJIFFY Function (Disabled)
Use this item to enable or disable the ECS eJIFFY Function. eJIFFY is ECS unique
software program for the quick access to the internet without entering O.S. Please
refer to Chapter 6 to know more about eJIFFY.
Press <Esc> to return to the main menu setting page.

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Internal Graphics Mode
Share Memory Size
SIDEPORT Clock Speed
GFX Clock Override
Init Display First
Memory Remap Feature
HDMI Audio
DCT Ungaged Mode
: Move Enter : Select
F1:General Help
Internal Graphics Mode (UMA+SIDEPORT)
Use this item to choose the onboard VGA mode. You can select [Disabled] to disablethe
onboard VGA, [UMA] to use the system memory.
Warning: If Disabled Internal Graphics Mode, please Load-
ing default toEnable it.
Share Memory Size (Auto)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
SIDEPORT Clock Speed (667MHz)
This item allows you to set sideport clock speed.
GFX Clock Override (Disabled)
Use this item to enable or disable GFX Clock Override.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Memory Remap Feature (Enabled)
This item allows users to enable or disable memory hole remapping.
HDMI Audio (Enabled)
This item is used to enable or disable the onboard audio chip.
DCT Unganged Mode (Always)
This item is used to select the DCT mode (DRAM Controller mode).
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
UMA+SIDEPORT
Auto
667MHz
Disabled
PCI
Disabled
Enabled
UMA
Enabled
UMA+SIDEPORT
Always
+/-/: Value F10: Save
F9: Optimized Defaults
Using BIOS
Help Item
Options
ESC: Exit
33