Rear Tail, Stop, Turn Signal, And Backup Lamps - Dodge Durango Owner's Manual

4. Align the index tabs of the front fog lamp bulb with
the slots in the collar of the bulb opening on the back of
the front fog lamp housing.
5. Insert the bulb into the housing until the index tabs are
engaged in the slots of the collar.
6. Firmly and evenly push the bulb straight into the lamp
housing until both tabs snap firmly into place and are
fully engaged.
7. Connect the wiring harness to the front fog lamp
connector.

Rear Tail, Stop, Turn Signal, And Backup Lamps

1. Raise the liftgate.
2. Remove the two push-pins from the tail lamp housing.
MAINTAINING YOUR VEHICLE 521
3. Grasp the tail lamp and pull firmly rearward to
disengage the lamp from the aperture panel.
7