Stereo Operation - DigiTech BP90 Owner's Manual

Stereo Operation

For stereo operation connect the bass to the Input of the BP90. Connect one cable to the
BP90's Left (Mono) output, and another cable to the BP90's Right output. Connect one cable
to the input of one amplifier, channel of a mixer, or power amp. Connect the second cable to a
second amplifier, second channel of a mixer, or power amp. If connecting to a mixing console, set
the pan controls of the mixer channels hard left and right in order to retain stereo separation. If
connecting to a mixer, set the Amp/Mixer switch to Mixer. If connecting to two amplifiers, set
the Amp/Mixer switch to Amp.
Stereo Amp Setup
Amp/Mixer
switch set to
Amp.
Bass Amp Input/Effect Returns
Outputs
BASS BASS BASS BASS
NOISE GATE NOISE GATE NOISE GATE NOISE GATE DELAY DELAY DELAY DELAY
CHORUS/FX CHORUS/FX CHORUS/FX CHORUS/FX
EQUALIZER EQUALIZER EQUALIZER EQUALIZER REVERB REVERB REVERB REVERB
AMP / DISTORTION AMP / DISTORTION AMP / DISTORTION AMP / DISTORTION EXPRESSION EXPRESSION EXPRESSION EXPRESSION
IN TUNE IN TUNE
COMPRESSOR COMPRESSOR COMPRESSOR COMPRESSOR COMPRESSOR COMPRESSOR PATTERN PATTERN PATTERN PATTERN
FRETLESS / WAH FRETLESS / WAH FRETLESS / WAH FRETLESS / WAH TEMPO TEMPO TEMPO TEMPO
PRESET LEVEL PRESET LEVEL PRESET LEVEL PRESET LEVEL LEVEL LEVEL LEVEL LEVEL
LEVEL LEVEL
VALUE VALUE
EDIT DRUMS DRUMS DRUMS DRUMS
EDIT
STORE STORE
TONE LIBRARY TONE LIBRARY TONE LIBRARY TONE LIBRARY EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LIBRARY EFFECTS LEVEL EFFECTS LEVEL EFFECTS LEVEL EFFECTS LEVEL MASTER LEVEL MASTER LEVEL MASTER LEVEL MASTER LEVEL
NOTE: When using a bass
amp, it may be best to con-
nect the Output of the BP90
to the effect return of the
amplifier.
Input
13