Locking & Limiting - Danfoss FMT230D User And Installation Instructions Manual

Locking & Limiting *
Locking - setting the thermostat at a temperature which
cannot be altered by the user.
Limiting - allowing the user to alter the temperature within
a predefi ned range, which is less than the full range of the
product (i.e. between 18-22°).
* The locking and limiting spring is supplied with the product
and needs to be fi tted by the installer.
Note: A tamperproof dial is
available for the FMT230D.
Please contact the Danfoss
sales offi ce on 0845 1217 400
to order.
GB
11