LG 42LH250H Owner's Manual page 132

Cloning Connections/Teaching Setup
Teaching the Master Setup to Another TV
Connections for the LT2002 to Teach another TV the Master Setup
IIL
or CATV
I
I
I
I
I
Target TV
\
_- -- --
I
I
4, I
.........
y
_n b_e_ ok
B,inkp_ern
QuickSet II Programmer
LT2002
CloneProgrammer
Teach Master TV's Setup to
the target TV
After learning is complete, remove the M.P.I. cable from the
master TV and connect it to the target TV that you want to
copy the master TV's setup into. With "THE CLONE HAS
CONTROLOF TV" message displayed, press 2 or use either
Channel key to go to the "TEACH TO TV" option, press ON/OFF,
POWER, or ENTER. Select the LT2002 memory that the new
setup is in. Press On/Off to transfer the new setup and other
information to the new TV. Teaching usually takes 2-3 minutes.
After the "TEACHING COMPLETE" message is displayed, press
any key to return to the Clone menu, then press ON/OFF,
POWER, or ENTER. If finished, detach M.P.J. cable from the
target, newly-cloned TV.
Disconnect TV Power for 15 Seconds
Unplug the AC power cord of the newly-cloned TV from the
power outlet for about 15 seconds to activate the newly-
copied setup.
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
-TOCHANGEMENUtTEMS, PRESS
CHANNEL KEYS OR DIGITS.
-TO EXECUTEtTEM, PRESS ON/OFF,
POWER, ORENTER
This menu should appear after any key
is pressed on the Installer remote.
-TEACHING IN PROGRESS,
PLEASE WAIT
This display will appear during
Teaching function.
TEACHING COMPLETE
This display will appear after Teaching
is complete.
P A G E 2 4 2o6-4118