Table of Contents
Advertisement
12
Setting Oven Controls
SETTING OVEN LOCKOUT FEATURE
The
or
automatically locks the oven door and prevents the Warmer Drawer from being turned on.
It does not disable the clock, Timer, electric and gas surface burners, Warmer Zone or
the interior oven lights.
To activate the Oven Lockout feature:
1. Press and hold
2. After 3 seconds a beep will sound and "DOOR LOCKED" will flash on the
Figure 1
control panel. Once the oven door is locked the "DOOR LOCKED" indicator will
stop flashing and remain on.
To reactivate normal oven operation:
1. Press and hold
LOCKED" will continue to flash until the oven door has completely unlocked
(See Figure 1).
2. The range is again fully operational.
SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:
The
or
modes. The oven control can be programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to
Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius. Press
Figure 2
and hold for 7 seconds; "550°" will appear in the display and a beep will sound.
If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 3).
If "C" appears, the display is set to show temperatures in Celsius (Figure 4).
2. Press
Figure 3
display will show either "F" (Figure 3) or "C" (Figure 4).
3. Press
change.
Figure 4
pad controls the Oven Lockout feature. The Oven Lockout feature
or
for 3 seconds (Figure 1).
or
for 3 seconds. A beep will sound. The "DOOR
and
or
pads control the Fahrenheit or Celsius temperature display
or
to switch between Fahrenheit or Celsius display modes. The
or
to accept the change or Press
or
(figure 2)
or
to reject the
Advertisement
Table of Contents
