Table of Contents
Advertisement
Setting the Self-timer
This setting allows images to be captured with the self-timer.
1. Slide the mode switch to [
the mode dial to one of the photography
modes.
2. Toggle the
Each press of the button moves the
icon one step through the sequence
and displays it on the screen.
For the [
3. Compose the image, press the shutter button down halfway, then press it
down fully.
The self-timer LED flashes and the image will be captured after the preset
time has elapsed.
The countdown is displayed on the LCD monitor.
To cancel the self-timer during operation, press the SET button.
The table below will help you choose the appropriate self-timer mode:
Self-timer mode
[
] 10 sec.
[
] 2 sec.
[
] 10+2 sec
EN-22
] and set
button to select the setting.
] movie mode and burst mode ([Continuous] and [Auto Exp.]):
Description
The image is captured about 10 seconds after the shutter
button is pressed.
The image is captured about 2 seconds after the shutter
button is pressed.
The first image is captured about 10 seconds after the
. shutter button is pressed, and then the second image is
captured 2 seconds later. The 10+2 mode is convenient
when capturing group images in succession.
The self-timer setting is automatically cancelled after an image is captured.
Use of the [
] self-timer setting is effective in preventing motion-
blur that can result when the shutter button is pressed at long exposure
times. Use this mode and a tripod for best results.
Advertisement
Table of Contents
