Table of Contents
Advertisement
Setup Menu (Basic tab)
In the setup menus you may adjust your camera's operating environment. The
settings will be retained after the power has been turned off or Auto Power Off
is activated.
1. Slide the mode switch to [
the mode dial to [
The [Basic] tab of the set-up menu is
displayed.
2. Select the desired [Basic] option item
with the
SET button to enter its respective menu.
3. Select the desired setting with the
buttons, and press the SET button.
4. To exit from the set-up menu, change
the mode dial setting.
Card Info.
This will display the total capacity of your memory card as well as the remaining
(unused) capacity. Note that the stated capacity may be less than the advertised
(labeled) capacity of your SD memory card. This is attributable to the difference
between binary (base 2) and engineering (base 10) methods of capacity
calculation.
Fr. No. Reset
This creates a new folder on your memory card. From this point forward, newly
captured images are stored in the newly created folder starting with image
number 0001.
Cancel:
Does not reset the file number.
Execute: Resets the file number and creates a new folder.
EN-46
] and set
].
/
buttons, and press the
/
Advertisement
Table of Contents
