Using The Self-Timer - Acer CR-5130 User Manual

Using the Self-timer

The [ ] self-timer button can select the capturing mode between "OFF" (default)
and "Self timer (2 sec., 10 sec., 10+2 sec. or Interval)".
[2 sec.] The camera automatically takes a picture after two seconds delay.
[10 sec.] The camera automatically takes a picture after ten seconds delay.
[10+2 sec.] The camera automatically takes a picture after ten seconds delay,
and takes again after two seconds.
In case of flash light capacitor is not charged up, the second take can
be done at two second after charged.
[Interval] The camera automatically takes a picture every preset time till
media full or battery empty.
To activate the self-timer by pressing the shutter button. After selecting this mode,
self-timer icon displays on LCD monitor and then LED on the front panel blinks fast
for the last 3 seconds. Using the self-timer allows you to get into the scene when
taking group images.
1. Secure the camera to a tripod or place it on a
stable surface.
2. Set the mode dial to one of [
M
[ ], [ ], [
camera .
3. Press the [
When you toggle the self-timer button, the
following are displayed in the accordingly order:
Off 10 sec
4. Compose the picture.
5. Press the shutter button down halfway, then press it down fully.
The self-timer function is activated. The photograph is then taken after the preset time.
When the photographs are taken using the LCD monitor, the count down is
displayed.
26
P Tv
], [ ], [
], [ ], [ ] and power on the
] button.
2sec 10+2sec
Av
], [ ],
Interval