Custom White Balance Setting
Custom white balance lets you set the white balance yourself by photographing a white subject
to use as the basis for the camera's white balance, and then selecting that picture for use as
white balance data.
Partial metering zone
70
1
Photograph a white subject.
Take a picture of a white subject, just as
you would take a normal picture.
Frame the shot so that the white subject
fills the entire partial metering zone in the
viewfinder.
This picture can be taken using any mode
( 20).
2
From the menu, select [Custom
WB].
Press the MENU button.
Turn the
then press the
3
Select the image.
Turn the
took in step 1, then press the
When the setting is entered, the screen
returns to the menu.
Press the MENU button to clear the
screen and exit the menu.
4
AF
Press the
WB
dial to select [Custom WB],
button.
dial to select the picture you
button.
button.
(
)
6