Inserting And Removing The Battery Pack; Inserting The Battery Pack - Canon EOS D30 User Manual

Inserting and Removing the Battery Pack

Inserting the Battery Pack

Load a fully charged BP-511 battery pack into the camera.
Battery Charge Remaining Icons
The level of charge remaining is shown in three stages when the Main Switch is set to ON .
( 33)
If the level of charge remaining runs out when you are using the menu screen or
playing back an image, a no battery warning appears on the LCD monitor. When
this occurs, remove the battery and charge it.
1 Open the battery chamber cover.
Slide the lever in the direction shown by the
arrow in the diagram, and open the cover
as shown.
2 Load the battery into the camera.
Make sure the battery pack is facing the
right way, and insert it into the battery
chamber.
Insert the battery pack until it locks into
place.
3
Close the cover.
Press the cover closed until it clicks shut.
: Charge is sufficient.
: Charge is low.
: Battery pack must be charged.
1
27