Buttons & Functions; Transmitter Operation; Silent Lock Unlock - Autopage RF-225 Operation Manual

TRANSMITTER OPERATION

Transmitter Button
Button
– Button
Button
Button for 3 seconds
Button
– Button
Button for 2 seconds
+ Button
+ Button for 1 seconds
*
II
ACTIVE LOCKING – LOCK & OPTIONAL ARMING:
1. Press button on transmitter.
The siren or horn will chirp once and the parking lights will flash once
2.
indicating that the system is now armed. The vehicle doors will lock
upon arming when interfaced with the security system.
Note: Defective sensor reminder: If the siren or horn sounds 3 chirps,
then you have left a door, trunk, or hood lid ajar. (OPTIONAL)
SILENT LOCKING AND UNLOCKING : ARMING / DISARMING: Press
the + button together on the transmitter to LOCK or UNLOCK your
security system, No chirp sound will be heard; arm / disarm confirmation
will be through the vehicles parking lights only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the
button on the transmitter twice within 3 seconds will arm the security
system and by-pass the shock sensor. The system will chirp one additional
time to confirm the sensor bypass mode was activated. The sensor bypass
feature is programmed to activate for one arming cycle only. The security
system will return to normal operation during the next arming cycle
PASSIVE LOCKING OR ARMING : Programmable
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive
System Function
Lock door / ARM
Arm and Delete
Optional Sensor
Car Locator
Panic function
Unlock Door /
DISARM
Two Steps Door
Unlock & Disarm
System
Pop Trunk Release
Silent LOCK /
UNLOCK
Activate Car-Jacking
(OPTIONAL)
SILENT LOCK /
UNLOCK
Switching code For
2nd Car Operation.
2
Remark
ARM (OPTIONAL)
Press twice.
(OPTIONAL)
While System Armed.
Press 3 seconds
Press twice within 3
seconds.
Press 2 seconds
Ignition in "OFF"
position.
Ignition in "ON"
position.