Available Hoops - Brother Pacesetter Embroidery Lettering Instruction Manual

3 Select the machine format from the Format drop-down list.
4 From the list of Hoops, choose a hoop size appropriate for
your design.
5 If needed, check the "Rotate by 90º" box to make the hoop fit
your design better.
6 Click OK.

Available Hoops

Pacesetter Embroidery Lettering software comes with a number
different sizes of hoops pre-loaded. The hoop sizes available for
each file type are listed in the following table.
Important: The maximum size of the design that you can save,
in any given file format, is limited by the largest hoop available
in that format.
For example, if you are saving as VIP, the largest design you
will be able to save is 170mm × 100mm.
If you try to save a file that is larger than the largest hoop, you
will be given an error message.
Learning about the Workspace 23