Setting And Changing The Clock; Setting The Minute Minder - AEG U25493 B 8139-4-m User Instructions

Setting and changing the clock

1. Simultaneously push "7" and "8",
until the time in the display flashes.
2. Adjust as required using "+" or "-".
3. Wait for the display to stop flashing.
The time will then be accepted, and
the dot in the centre of the hour
and the minutes will flash every
second.

Setting the minute minder

You can use the minute minder on its own, without effecting the oven.
1. Press "4 ". The lamp will flash. The
display will read "0.00".
2. Use "+" or "-" to set the timer in
minutes and seconds.
3. Start the timer with "4" or wait until
the lamp stops flashing. You will see
in the display the time remaining
until the buzzer sounds.
An acoustic signal is heard when the
set time has elapsed.
4. Press any button to stop the buzzer. The display will show the normal
clock again.
OPERATING INSTRUCTIONS
17