Connectors - Asus V6-P7H55E User Manual

3.4

Connectors

1. ICH7 Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P7H55-M SATA connectors
Install the Windows
2. USB connectors (10-1 pin USB1112, USB910, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
P7H55-M USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module is purchased separately.
3-4
P7H55-M
XP Service Pack 2 or later version before using Serial ATA.
®
USB1112
P7H55-M
SATA1 SATA2
SATA3 SATA4
USB910
PIN 1 PIN 1
USB78
PIN 1
Chapter 3: Motherboard info