Conversion From Natural To Lpg Gas - Electrolux EOG 10000 User Manual

Conversion from Natural to LPG Gas

IMPORTANT
The replacement/conversion
from Natural to LPG gas
should only be undertaken by
a competent and qualified
engineer.
It is important to note that this model is
designed for use with natural gas but can
be converted for use with LPG providing
the correct injectors are fitted. The gas
rate is adjusted to suit.
Replacement of gas oven
burner injector
To replace the gas burner oven injector,
follow this procedure:
1. Remove the bottom plate of the oven
("A") to access the gas oven burner;
2. Undo the two fixing screws ("C")
which keep the gas oven burner in
place
3. Gently slide the oven gas burner off
the injector support ("D") and slowly
move it to the left hand side. Check
that the burner bush does not slip off
the burner mouthpiece, and take care
not to cause stress to the spark plug
connection wire ("E") and the
thermocouple ("F") conductor;
4. With a 7 mm socket spanner unscrew
and remove the gas burner injector
("D"), and replace it with the required
one (see Injector Table);
5. Reassemble the burner following the
same procedure backwards.
The oven burner does not
require any primary air
regulation.
electrolux 27