Printer Port - D-Link DP-101P - Pocket Ethernet Print Server User Manual

Multi-protocol ethernet pocket size print server

Hide thumbs Also See for DP-101P - Pocket Ethernet Print Server:

Table of Contents

DP-101P+ Print Server User's Manual

Printer Port

The printer port, is configurable by commands in the PS Admin

program, or by commands issued to the DP-101P+ via Telnet. See

the PS Admin User's Guide for configuration procedures.

The print server also supports web configuration permitting users

to configure settings through the web browser. DP-101P+ default

IP address as follows:

Default IP address – 192.168.0.1

Subnet Mask – 255.255.255.0

Note:-

The PC's IP address must correspond with the print server's IP

address in the same segment for the two devices to communicate.

Introduction

Table of Contents

Do you have a question about the DP-101P - Pocket Ethernet Print Server and is the answer not in the manual?

Dp-101p+