Installing The Dp-101P - D-Link DP-101P - Pocket Ethernet Print Server User Manual

Multi-protocol ethernet pocket size print server
Hide thumbs Also See for DP-101P - Pocket Ethernet Print Server:
Table of Contents

Advertisement

DP-101P+ Print Server User's Manual

Installing the DP-101P+

Follow these steps for a trouble-free start of print-server operations
with your DP-101P+. Please take particular notice of the warning
in step 4: the network connection should be made before supplying
power to the DP-101P+.
1. Confirm proper operation of the printer to be connected to the
DP-101P+.
2. When you have confirmed proper operation of the printer,
switch its power off.
3. Confirm that your network is operating normally.
4. Connect the DP-101P+ to the network (through the RJ-45
receptacle on the print server's rear end).
WARNING:
5. While the printer is power off, connect the DP-101P+ print
server directly to the printer parallel port.
6. Switch printer power on.
7. Plug the AC Power adapter's output plug into the DC power
input socket on the rear end of the DP-101P+.
8. Plug the AC Power adapter into an electric service outlet. This
will supply power to the DP-101P+. (The DP-101P+ has no
power switch.) The DP-101P+'s self-test routines will proceed
automatically.
10
Configuration problems may result if the DP-101P+
is powered up without first establishing its network
connection. Follow this procedure to avoid
complications at the configuration stage.
Unpacking and Installation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-101p+

Table of Contents