Chapter 3 Connecting The Poe Splitter - TP-Link TL-POE10R User Manual

LAN OUT: Connect to
the Ethernet device
with CAT5 UTP cable
to transmit data.
PWR: Power LED, a steady green light indicates
that the PoE Injector can supply power.

Chapter 3 Connecting the PoE Splitter

You can use TL-POE10R PoE Splitter with PSE or PoE Injector
to expand your network to where there are no power lines or
outlets, where you wish to fix devices such as APs, IP Cameras
or IP Phones, etc. The following steps will tell you how to
connect the PoE Splitter correctly.
1. Use a CAT5 UTP cable to connect a PoE port of the PSE (ex.
PoE Switch) to the POWER+DATA IN port.
2. Choose the appropriate DC output by the Power-mode
switch.
Note:
Please make sure that the output is correct, a different
voltage may destroy the device.
DC OUT: Connect to the
power port of the Ethernet
device with the provided
power cable to supply the
power of 5V, 9V or 12V DC.
3