Pioneer 504CMX - PDP - 50" Plasma Panel Technical Manual page 32

4. Installing and Using Software
b) Double-click speed
Set pen double-click speed.
Notes:
¶ Screen appearance varies with computer environment.
¶ Adjust pen settings to suit your personal preferences.
¶ These settings also affect the double-click speed of the mouse.
¶ Use the "Set Default" button to return to the default double-click speed.
c) Other setup
Set to enable/disable the small button of the pen, the 3-button mouse emulation function when small button is enabled,
enable/disable recognition of changes in resolution and optimization of HTML operation. A check mark indicates that the
respective function is enabled while the lack of a check mark indicates it is disabled.
Notes:
¶ Screen appearance varies with computer environment.
¶ The small button of the pen (middle mouse button) is enabled by default. Disable the small button (middle mouse button) in any
application where pen operation interferes with the mouse.
¶ Pen functions other than the small button (middle mouse button) cannot be changed.
¶ To take advantage of all CB-Link utility functions, the small button (middle mouse button) must be enabled.
¶ The 3-mouse button emulation function must be on to enable movement of graphical objects, zoom in/zoom out and other CAD
software functions by holding down the small pen button (middle mouse button).
¶ The function recognizing changes in resolution is on by default.
On: A calibration warning appears when the resolution is changed.
Off: A value calibrated earlier will be applied automatically when the resolution is changed and no warning appears.
¶ HTML optimization (click range) is disabled by default.
¶ The click range can be set when optimization is on. Set to suit your personal preferences. Use the "Set Default" button to return to
the default click range.
¶ Do not enable this function when HTML works fine. Some range settings of this function may interfere with normal operation.
32