LaCie Professional Server
Technical Brief: RAID
8.5. Data Volume: RAID 5
1. Launch
Disk Management
that Disk 0 may have an active partition
RAID 5 array using Disks 0, 1, and 2, we must have three
located
partitions. Therefore, the Data
leted before building the RAID 5. Since deleting the volume will
also remove the files stored on the
back up all data before moving to the next step. To delete the
partition, right-click on Data (D:) to select Delete Volume...
and click Yes at the Windows prompts. See
RAID 5
for screenshots if further details are necessary.
2. Before creating the RAID 5 array from the four drives, confirm
that you have four Unallocated partitions of equal value similar
to
Fig.
95.
Fig. 95
(8.2. Adjusting the
RAID). Please note
Data
(D:). To create the
(D:)
partition will be de-
Data (D:)
partition, please
7.7. Data Volume:
continued on the next page>>
Unal-
RAID - Four Disks
page 71