Table of Contents
Advertisement
LaCie 2big Dual
User Manual
2.2. Turning the Drive On
The power supply kit is composed of two cables: one
cable (A) connects to the LaCie drive; and the other
cable (B) connects to a power outlet, such as a wall out-
let or a surge protector.
D
Fig. 2.2
1.
Connect Cable
2.
Connect Cable
3.
Connect Cable
4.
Turn on the drive by moving the power switch on the back of the drive to the "On" position (
ization, the front led blinks blue and red. The 2big Dual is ready to use when the LEDs are solid blue. The volumes will
appear in My Computer (Windows) or on the desktop (Mac).
TeChNICAl NOTe:
computer.
CAUTION:
Only use the AC adapter supplied with your specific LaCie drive. Do not use a power supply from another
LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to the device and
void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter
may result in damage to your drive and will void your warranty.
TeChNICAl NOTe:
To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts no responsibility for
any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized
by LaCie will void your warranty.
off auto on
A
to your LaCie Drive.
B
to the power supply brick (C).
to a surge protector or wall outlet.
B
When the power switch is in the AUTO position, the 2big Dual turns off and on with your
You may use your LaCie drive when in a foreign country thanks to its 100-240 Volt power supply.
C
Setup
page 13
D). During drive initial-
Advertisement
Table of Contents
