Table of Contents
Advertisement
3.6.2
Display Test
This is a self-test to inspect the AutoScanner's LCD display. The
test will turn every pixel black.
Select Display Test from the Tool
Setup/Test menu and press
ENTER.
The display will toggle between the two following screens every
3 seconds. Look for missing spots in the solid black characters.
When done, press the BACK key to return to the Tool Setup/Test
menu.
LCD Test
Press BACK To Quit
3.6.3
Keypad Test
The Keypad Test is used to check the functionality of the
AutoScanner's Keypad.
Select Keypad Test from the Tool
Setup/Test menu and press the
ENTER key.
Each time you press a key, its name
should appear on the display. For
example, if you press the
key, the screen will display
"UP / YES." If key's name does not
display, then the key is not working. Press the other keys to verify
proper operation.
Check the BACK key last. When
the BACK key is pressed, the
AutoScanner will return to the Tool
Setup/Test menu. If you are not
returned to this menu, then the
BACK key is not working.
3-10
Tool Setup
2)Display Test
Tool Setup
3)Keypad Test
UP / YES
/YES
Press Any Key
Leaving Keypad Test
BACK
Using the Tool
Hide quick links:
Advertisement
Table of Contents
