Inserting The Battery Pack - AT&T MLC-6 Installation And Troubleshooting Manual

Inserting the Battery Pack

Remove battery cover
from the handset by pressing down
on the raised dots and sliding the
cover towards you.
Plug the white plastic end of the cord attached to the battery pack
into the battery connector jack compartment. The battery contacts
should face down.
Replace the cover by sliding it forward until it snaps into place. Be careful
not to pinch the battery cord.
If a battery pack is already in
the compartment, first unplug the
battery cord from the handset and
remove the old battery pack.
Place the new battery pack in the
compartment with the battery cord
coming from the top left side of the
battery pack.
13