Expansion Slot; Installing An Expansion Card - Asus AP1600R-E2 BA2 User Manual

2.5

Expansion slot

2.5.1 2.5.1 2.5.1

Installing an expansion card

Installing an expansion card Installing an expansion card
2.5.1 2.5.1 Installing an expansion card Installing an expansion card
The barebone server comes with a riser card bracket. You need to remove
the bracket if you wish to install a PCI-X expansion card.
To install a PCI-X card:
1. Use a Phillips (cross) screwdriver to remove the screw that secures
the riser card to the standoff.
R i s e r c a r d s c r e w R i s e r c a r d s c r e w R i s e r c a r d s c r e w R i s e r c a r d s c r e w R i s e r c a r d s c r e w
R i s e r c a r d s t a n d o f f R i s e r c a r d s t a n d o f f R i s e r c a r d s t a n d o f f
R i s e r c a r d s t a n d o f f R i s e r c a r d s t a n d o f f
2. Firmly hold a riser card bracket,
then pull it up to detach it from
the PCI-X slot on the
motherboard.
3. Remove the screw that secures
the slot metal cover.
4. Install a PCI-X card to the
bracket as shown, then secure
the card with a screw.
A S U S A P 1 6 0 0 R - E 2 ( B A 2 ) A S U S A P 1 6 0 0 R - E 2 ( B A 2 ) A S U S A P 1 6 0 0 R - E 2 ( B A 2 )
A S U S A P 1 6 0 0 R - E 2 ( B A 2 ) A S U S A P 1 6 0 0 R - E 2 ( B A 2 )
2 - 1 1 2 - 1 1 2 - 1 1
2 - 1 1 2 - 1 1