Chapter 2: Hardware Setup; Chassis Cover; Removing The Cover - Asus AP1600R-E2 BA2 User Manual

2.1

Chassis cover

2.1.1 2.1.1

Removing the cover

Removing the cover
2.1.1 2.1.1 2.1.1 Removing the cover Removing the cover Removing the cover
1. Use a Phillips screwdriver to remove the screw on each front end of
the top cover.
2. Loosen the two thumbscrews on
the rear panel to release the top
cover from the chassis.
3. Firmly hold the cover and slide it
toward the rear panel for about
half an inch until it is disengaged
from the chassis.
4. Lift the cover from the chassis.
2 - 2 2 - 2 2 - 2
2 - 2 2 - 2
T h u m b s c r e w s T h u m b s c r e w s T h u m b s c r e w s T h u m b s c r e w s T h u m b s c r e w s
1 / 2 i n c h d i s t a n c e 1 / 2 i n c h d i s t a n c e 1 / 2 i n c h d i s t a n c e
1 / 2 i n c h d i s t a n c e 1 / 2 i n c h d i s t a n c e
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p