Asus AP1600R-E2 BA2 User Manual page 28

5. Take note of the holes on the
riser card bay. The two pegs on
the riser card bracket should
match these holes to ensure
that the bracket is properly in
place.
6. Install the riser card bracket with
the card into the PCI-X slot on
the motherboard.
7. Make sure that the golden
connectors completely fit the
slot and the bracket aligns with
the rear panel.
8. Secure the riser card to the
standoff.
9. Connect the cable(s) to the
card, if applicable.
2 - 1 2 2 - 1 2 2 - 1 2
2 - 1 2 2 - 1 2
P e g o n t h e r i s e r P e g o n t h e r i s e r P e g o n t h e r i s e r
P e g o n t h e r i s e r P e g o n t h e r i s e r
c a r d b r a c k e t c a r d b r a c k e t c a r d b r a c k e t
c a r d b r a c k e t c a r d b r a c k e t
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p