Operation; On/Off; Setting The Clock; Setting The Temperature - Amcor PVMB 12KEH-410 Instruction Manual

OPERATION

ON/OFF

Press to switch the unit on, or to switch off. A buzzer will beep, and the LCD will
display 12:00 o'clock as default.

Setting the clock

Press the -button for 3 seconds to set the clock. The 2 left digits of the 4 digits on
the LCD-display will flash. Press or to adjust the hour. Press
2 right digits of the 4 digits will flash. Press or to adjust the minutes of the clock.
Press the -button for 3 seconds again to activate the clock.

Setting the temperature

If you want to change the set temperature press the or -button. The 2 digit
display will indicate the set temperature.
Note: Reaching the set temperature depends on the room and outdoor climatic
conditions.
Mode
-button to switch the operating mode between 'cooling' , 'fan only'
Pressing the
and 'heating'.
Fan speed
If you prefer a constant fan speed instead of the auto fan speed, press the -button
successively; the fan speed icon
• Fast - for the turbo speed
• Normal - for the medium speed
• Slow - for the slow speed
• Auto - alternating fast and slow speed
Timer
For all of the following TIMER programming, proceed firstly with these standard
steps:
• Press the -button briefly; the 2 left digits of the 4 digits on the LCD display are
flashing.
• Press or to adjust the hour.
• Press the -button briefly again, the 2 right digits of the 4 digits are flashing.
• Press or to adjust the minutes of the clock in intervals of 5 minutes. The
timer is set. After 10 seconds the time display returns.
on the LCD-display will rotate accordingly.
momentarily, the
Timer setting example
GB
7