Partial Extension; To Return The Rear Seat Back To Its Original Position; Anchoring The Load - Alfa Romeo Brera Owner's Manual

Partial extension

Proceed as follows:
❒ move seat belt aside; check that the
seat belt is not twisted;
❒ lower completely the rear seat head
restraint;
❒ raise backrest retaining lever A-
fig. 76 and tilt the backrest for-
ward (when raising lever A the "red
band" B will appear).
94
To return the rear seat
back to its original position
Move aside the seat belts, check that
they are not twisted.
Raise the seat backrests and push them
back until hearing the locking click of
both retainers; the "red band" B aside
the levers A shall no longer be visible.
The "red band" B actually indicates that
the backrest is not properly secured.
WARNING
Make sure the backrest
is properly secured at
both sides ("red bands" B-fig.
76 not visible) to prevent it
moves forward in the event of
sharp braking causing injuries
to passengers.
fig. 78

ANCHORING THE LOAD

The boot houses 4 hooks for anchoring
ropes in order to guarantee perfect load
anchoring.
On certain versions, hooks B-fig. 78
can be located on the boot sides.
WARNING
A heavy load that has
not been secured may
cause serious harm.
A0F0131m