Other Methods Of Installation; Xerox Tcp/Ip Port Monitor - Xerox 6200DX - Phaser Color Laser Printer Network Manual

6. Click Next to accept the printer's default name or enter an alternate name, and then click Save
Changes before clicking Next.
7.
The information dialog box displays the files to be copied to your system. Click Next to install the
files and Finish to complete the installation.

Other methods of installation

Xerox TCP/IP Port Monitor

The Xerox installer for Windows automatically installs Xerox TCP/IP Port Monitor for those
installations using the PCL 5c driver. The Xerox TCP/IP Port Monitor can be used to add or remove
TCP/IP ports.
Adding a port using Xerox TCP/IP Port Monitor
1. To add a TCP/IP port, open the Printer Properties dialog box for the printer you would like to
attach the new TCP/IP port.
a.
Click Start, scroll to Settings, and click Printers.
b.
Click your right-mouse button on the printer to which you want to attach the new TCP/IP
port, and select Properties.
2. Select the Details tab, and click the Add Port button.
3. In the Add Port dialog box, select Other.
4. From the list of available printer port monitors, select the Xerox TCP/IP Port, and then click the
OK button.
5. At this point, you enter the Xerox TCP/IP Printer Port Wizard. The wizard guides you step-by-
step through the following procedures:
a. Choosing a name for the new port.
b. Identifying a printer by its DNS Name or IP Address.
c. (Alternatively) Identifying a printer using the automatic Printer Discovery feature. Click
Next to proceed with the port installation.
6. The wizard verifies the port name and printer address, and automatically configures the remaining
port settings for you. Any errors detected in printer identification displays a dialog box requesting
Additional Information.
In the Add Xerox TCP/IP Port window:
a.
Under Enter a Port Name, enter a unique name for the port being added.
b.
Under Enter a printer name or IP address, enter the printer's host name or IP Address.
c.
Click Next.
Note
To locate Xerox printers on your local area network, select Auto Printer Discovery, and
then click Refresh. The Xerox TCP/IP Port Monitor searches the network for Xerox printers
and displays them in a list. Select your desired printer from the list and click OK.
Phaser® 6200 Color Laser Printer
Windows 95/98/Me Network
14