Onboard Devices Configuration - Asus K8V-X SE User Manual

2.4.3 Onboard Devices Configuration

Onboard AC'97 Audio
OnChip SATA BOOTROM
OnBoard LAN
OnBoard LAN Boot ROM
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
ECP MOde DMA Channel
Parallel Port IRQ
OnBoard AC'97 Audio [Enabled]
[Auto] allows the BIOS to detect whether you are using any audio device. If an
audio device is detected, the onboard audio controller is enabled; if no audio
device is detected, the controller is disabled.
Configuration options: [Disabled] [Enabled]
OnChip SATA Boot ROM [Enabled]
Allows you to enable or disable the onchip Serial ATA boot ROM.
Configuration options: [Disabled] [Enabled]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [EPP] [ECP]
EPP Version [1.9]
Appears only when the Parallel Port Mode is set to [EPP]. This item allows you
to to select the Parallel Port EPP version. Configuration options: [1.9] [1.7]
2-20
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[378]
[ECP]
[DMA3]
[IRQ7]
Chapter 2: BIOS Setup