Asus GigaX 1024P User’s User Manual page 33

1. Enable or disable a port
2. Speed and duplex mode. Select 1000 full-duplex on the Fast Ethernet ports
(from 1 to 24) will set the ports to 100 full-duplex mode.
3. Flow control - Back pressure flow control is used in half and full duplex
modes to prevent packet loss.
A software reset will be triggered after the configuration is apply. The
purpose of software reset is to restart link negotiations.
4.7.2 Link Aggregation
32 GigaX Centralized Network Management User's Manual
Figure 4.19. Link Aggregation