Asus GigaX 1024P User’s User Manual page 20

5. Add Switch: add a switch to the topology tree manually. A window pops out
for this purpose as Figure 4.6. Select the network adapter you want the
switch to attach to, give the switch MAC and name, and an authentication
key as the password if you don't use the default one (2379), then click OK to
finish the action. However, a manually added switch does not mean it can be
configured or discovered by CNM. The function provides a way to add a
known switch to topology list once the CNM cannot discover the switch.
There is a tool bar button for it..
6. Remove Switch: you can remove any switch in the topology list manually
through this function. It pops out a switch list and check those switches you
want to remove. Please refer to Figure 4.7 for the switch list window.
GigaX Centralized Network Management User's Manual
Figure 4.6. Add Switch
Figure 4.7. Remove Switch
19