Configuration - Asus GigaX 1024P User’s User Manual

4.7 Configuration

The Configuration menu provides the configuration for all the functions that
the switch can supports, like physical interface, link aggregation, bandwidth
control, traffic control, VLAN, IGMP snooping and QoS.
To keep all the new configurations and save the bandwidth for
communications, each configuration page will not retrieve information from
switch until you click the Reload button. In some configuration pages, you
can select the ports to reload the information from the switch.
4.7.1 Physical Interface
Figure 4.18. Physical Interface
Figure 4.18 shows the configuration for each port. Select the ports you want
to configure or reload information from the switch by clicking on the check
boxes in front of the ports, then click on Config to set the configuration for
the ports, or click on Reload to retrieve configuration from the switch, or click
on Apply to apply the new settings to the switch. Some settings you can do
to the physical interface
GigaX Centralized Network Management User's Manual 31