1. Safety Information The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance...
2. Safety Instructions CAUTION. PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS USER MANUAL AND MARKED ON THE APPLIANCE. RETAIN THIS BOOKLET FOR FUTURE USE. This set has been designed and manufactured to assure your personal safety. Improper use can result in Electric shock or Fire hazard.
Contents Item. Page number Safety Information Safety Instructions Parts and Accessories User Controls Rear View Connections Remote Control Getting Started Watching TV Displaying a PC on TV External Connections Using Headphones Using a CAM (conditional access) module Viewing Teletext Accessing Menu’s Quick Access Buttons Organising Channels Automatic Tuning of TV...
4. User Controls MENU TV/AV Eject. DVD disc eject. Standby button. Switches the TV to stand-by and on again. The TV is Play. DVD play button only fully disconnected from the mains supply when the Pause/Step. DVD mains plug is turned off or disconnected. pause play and Step Programme Up/Down button.
5. Rear View Connections You can connect a wide range of external equipment to this product. Please refer to your equipment manufacturers guide for further information. See table below for descriptions of the available connectors Socket Connect to DC -IN Connect mains adaptor or DC supply from caravan / boat HDMI High Quality HD.
6. Remote Control Use To use the remote control, insert the batteries into the battery compartment. Ensure the POWER button of the TV is switched on. Point the remote control towards the remote control sensor on the TV and press the STANDBY button.
10. External Connections It is possible to connect many different types of external equipment to your TV. A variety of sockets are provided to assist with this and are shown in Fig 10. A typical possibility is shown using a DVD Recorder or VCR. Do NOT connect more than one type of connection to each apparatus as this could cause interference to sound or picture.
12. Using a conditional Access Module (CAM) in the CI slot Fig 11 This feature allows the user to access digital terrestrial “pay per view” channels To use this facility you need to purchase a Conditional Access module (CAM) and a viewing card, these may be obtained from most good high street retailers.
Viewing Teletext cont.. Digital TV. Press the INPUT button and highlight DTV using the▲ / ▼buttons and press ENTER to select. Press the TEXT button to display the TEXT menu on the right side of the screen. Press the ▲ / ▼buttons to select the subject of interest and press ENTER to confirm. If there is more than one page of text use the cursor ◄...
Accessing and using the Menu’s cont.. 15. Quick Access buttons Input. This button displays the input source menu. Press the INPUT button to display the menu and use the ▲ / ▼ button to highlight the required input, then press ENTER. P Mode.
Quick Access buttons cont.. Display. This function will allow information relating to the current TV station or programme to be displayed on the screen. Press the DISPLAY button to display the programme information at the base of the screen. Press the button again to remove the information. Subpage/Subtitle.
Playing DVD’s. The film may start automatically or you may be presented with a menu screen, this is dependant on the way the DVD is authored by the movie company. Press the ENTER button to begin playback or use the ▼▲◄► buttons to navigate the menu. Pause Play.
Page 26
Sequential Playback. Press the PROGRAM button to open the sequential menu screen. Use the ►/◄/▲/▼ buttons to navigate to each sequence. Use the number buttons to input the title and chapters to view. Use the ►/◄/▼/▲ buttons to navigate to “Play” Press ENTER.
Playing Audio CD’s Insert an audio CD. Playback will automatically start at the first track. The track number, total number of tracks, repeat mode and elapsed time will be displayed at the top of the screen. Control During Playback. The following controls are available during playback as described for playing DVD’s. Play, Pause, Stop, Fast forward, Fast backwards, Skip forwards, Skip backwards, Repeat A-B, Goto, Program, Audio.
23. Trouble Shooting Guide Should the TV stop working or work abnormally. Please consult the guide below, before calling the customer help line. Symptom Possible cause Remedy Check DC connection to TV Dead No led lit Power not connected to TV Check connection to mains adaptor an that the supply is turned on.
Need help?
Do you have a question about the ASTDVD1938W-HDID and is the answer not in the manual?
Questions and answers