B10274-R4-105B-U&C-ENG
DO NOT INSTALL THE ACTUAL SMOKE
ALARM
IN
BUILDINGS
COMPLETED
COVERINGS) AND BUILDING HAS BEEN
FULLY CLEANED.
(Excessive dust & debris from building work
can contaminate the smoke chamber and
cause problems).
An installed smoke alarm must be removed or
covered fully (with a plastic bag or similar)
before renovations begin.
P/N B10274 Rev4
OPTICAL
SMOKE ALARM
Contains vital information on unit operation and installation.
Read and retain carefully. If you are just installing this unit this
leaflet MUST be given to the householder.
Please read the first short section containing basic
information.
30/9/09
8:23 AM
WARNING
NEW
OR
RENOVATED
UNTIL
ALL
WORK
(INCLUDING
© Ei Electronics 2008
Models:
Ei105B
Ei105C
WITH INTERCONNECT
Page 14
IS
FLOOR