Getting Started; Safety Instructions; Manual Conventions; Basic Setup - Aguilar AG 500SC Owner's Manual

A. Safety Instructions
Please follow these guidelines:
A) Vents are provided for heat dissipation at the rear of the
amplifier. Maintain at least a 1" space around these vents to
provide sufficient ventilation. If you decide to rack mount the
amplifier make sure you do not block the vents.
B) Keep all sources of fire, such as lighted candles, away from the
amplifier.
C) This product is approved for use in any climate.
D) Do not expose the product to dripping or splashing. Do not
place objects filled with fluid on the amplifier.
E) Amplifier must be connected to a mains socket outlet with a
protective earthing connection.
F) The appliance coupler (AC cord) is the disconnect device. The
disconnect device shall remain readily operable at all times.
B. Manual Conventions
In this manual, words that appear in
controls on the AG 500SC.
C. Basic Setup
Plug in your instrument. The amount of power this amplifier will produce
varies with the impedance rating of your cabinets.
One 8 ohm cabinet – 250 watts
Two 8 ohm cabinets – 500 watts
One 4 ohm cabinet – 500 watts
Master
With the
I. Getting Started
volumes down, turn on your amplifier. Adjust as follows:
italics
represent actual physical
3.