Download Print this page

Getting Started - Aguilar Tone Hammer 500 Owner's Manual

Advertisement

WARNING: To reduce the risk of fire or electric shock, do not expose equipment to rain or
moisture. Aguilar Amplification assumes no responsibility for any damage or injury that results
from improper use or service.
CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! There are no user serviceable parts
inside of this product. This is a high voltage device, and internal voltages can be lethal. Any and
all work should be performed by qualified personnel only.
In order to ensure safe operation of the device, please follow these guidelines:
1.
Read the instruction manual in its entirety before trying to operate the equipment.
The manual should be kept for future reference.
2.
Observe all safety precautions, warnings and instructions noted in this manual.
3.
Always unplug the amplifier out of the wall socket, before cleaning. Use only dry
cloth. Do not use aerosols or solvents.
4.
Keep the device away from sources of water such as pools, bathtubs, and sinks, and
do not expose it to rain or splashes of water. Do not place objects filled with fluid on
the device.
5.
Vents are provided for heat dissipation on the sides, and at the rear of the amplifier.
Maintain at least a 2" (5cm) space around these vents to provide sufficient
ventilation.
6.
Keep the amplifier away from sources of heat and open flame, such as heaters,
radiators, stoves, lit candles, etc.
7.
Make sure that the power cord is intact before plugging it into the unit. Do not use
cords with visible damage to its insulation, or connectors.
8.
This device is equipped with a safety feature that requires the use of the three-pin
grounding power plug. Do not defeat the safety purpose of the grounding plug. If
provided plug does not fit your outlet, consult an electrician about replacing an
obsolete power outlet.
9.
Use only accessories listed in this manual, or in other way specified by the
manufacturer.
10.
Do not install this amplifier on carts or other moving objects.
11.
When amplifier is in use, route the power cable in such way that will prevent it from
being stepped on, tripped on, pinched or damaged in any other way.
12.
Do not use this device with wall/ceiling mounts not specified by the manufacturer.
13.
To completely discontent the equipment from the AC mains, disconnect the power
cord from the AC receptacle. For additional protection, unplug the device during light
storms, or when not used for long periods of time.
14.
No user serviceable parts inside. Refer service to qualified service personnel. If the
unit was exposed to liquid, extensive heat or fire, or sustained a mechanical damage
of any kind, do not attempt to operate it. Disconnect the unit from the wall outlet,
and consult qualified service personnel.
II. Getting Started
3.

Hide quick links:

Advertisement

loading