HP rp7400 Manual page 55

Specify Power Connections
The HP rp7400 power system is a 200/208/230/240 VAC product
requiring a dedicated 20A branch circuit. The power system is comprised
of two or three 10A, 1163W n+1 hot-swappable system power supplies,
depending on how the system is configured. The total continuously
available power to the SPU is 2 x 1163W or 2325W.
HP does not support plugging HP rp7400 power supplies into
wall or floor sockets. The power cords provided for the power supply is
plugged directly into a UPS or a power distribution unit (PDU) using a
jumper cord (HP part number 8120-1860). Customers wishing to connect
directly to wall or floor sockets must provide their own power cord
solution.
NOTE
The acronym PDU (power distribution unit) in this
document refers to the power strips attached to the HP
rp7400 cabinet.
CAUTION
HP does not recommend and does not support the use of
"ferro-active" or "ferro-resonant" power correction in
conjunction with the rp7400 server. These type of line
conditioners represent an older technology that is not
compatible with the most recent designs in active PFC
power supplies such as those in the HP rp7400 servers.
"Ferro-active" or "ferro-resonant" line conditioners may
cause an increase in total harmonic distortion and may
produce significant and unpredictable voltage regulation
anomalies.
Modular PDUs
Two modular PDUs are available for use with the rp7400 product:
• 20A modular PDU, HP product number E7674A. This PDU has seven
C13 outlets and one C19 outlet. Note that if this PDU is used to
55