Neoware e140 - Thin Client User Manual page 125

Enable direct printing (Streaming LPD) [optional] – When
•
selected, this checkbox sets the Print Manager utility to send an
incoming print job (coming from a remote LPD service) directly
to the defined printer port instead of saving it as a file in the print
spool directory. This setting is most often used when large print
files are typically associated with a specific printer and those files
typically exceed the available space on the thin client's Flash disk
for writing spool files.
When selected, this entry creates the following line for this
printer in the dynamically-generated printcap file:
:dp:\
Next
Click .
Advanced Information
The Advanced
Information
dialog pro-
vides settings
that are impor-
tant if you
intend to use
the locally-
defined printer
with ICA or
RDP connec-
tions, or if you
need to cus-
tomize the
printcap file entries for the printer.
Note: Do not make edits to a local printcap file in this version of
NeoLinux. The printcap file is generated dynamically from registry
entries when the Print Manager starts at device startup, and after
changes in the Print Manager utility. Special entries can be made
using the Additional printcap entries section on the Advanced Infor-
mation dialog.
Using the NeoLinux Print Manager utility
Adding printers using Print Manager 125