Saving Network Settings Changes - Neoware e140 - Thin Client User Manual

Configuring Your Network Settings

Saving network settings changes

32 Saving network settings changes
DNS:
Timeout (seconds): [Default: 3] The number of seconds the device
will wait when attempting to communicate with a DNS server before
retrying communication, or if all allowed retries have been
attempted, before ceasing to attempt to establish communication.
Retries: [Default: 3] The number of times the thin client will
attempt to make contact with a DNS server before ceasing the
attempt.
Port Check Timeout (seconds): [Default: 20]
During bootup, NeoLinux checks networking functionality by call-
ing a port check function. This setting allows the administrator to
change or eliminate the length of time the software awaits a
response.
Default Interface: [Default: Built-in Ethernet]
If more than one network interface adapters are recognized by
NeoLinux, then the administrator may select which one is use by
default as the primary network connection. In that case, all network
traffic that doesn't get routed through any other interface will auto-
matically be routed through the defined default interface.
Once you make changes to your network settings, click
confirmation dialog will appear. Click
networking and apply the changes or
Settings dialog.
OK
OK
to restart the appliance
Cancel
to return to the Network
and a