Configuring Your Network Settings
ezUpdate tab
The default
ezUpdate settings
allow an
unconfigured thin
client to
automatically
receive
configuration and
software updates
from an ezUpdate
server.
28
Network Settings dialog
addresses are appended to the nameserver list used by the thin client
at networking startup.
When networking starts, the thin client goes through the list and per-
forms a port check to verify that each DNS server is operating, delet-
ing from the list any that does not respond. After the check, the thin
client will copy into the client resolver file and use only the first
three listed addresses that responded to the port check.
Highlight a nameserver address in the list and click
Move Down
to adjust that address's placement in the list. Click
Delete
in order to remove the address from the list.
ezUpdate tab
Click on the
or view ezUpdate settings.
What is ezUpdate?
ezUpdate is the mechanism that allows Neoware thin client appli-
ance configurations and software to be automatically updated from
on the Network Settings dialog to change
Move Up
or