Bonjour - TP-Link TL-SC3230N User Manual

UPnP: To enable or disable the UPnP service here.
Friendly Name: To show the friendly name of this camera here.
UPnP NAT Traversal: When enabled, the camera will attempt to configure port mapping in a
NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the NAT
router first.
Port Range: The port range will open in NAT router.
External IP address: Show the IP address and port for WAN access through Internet. If
NAT traversal is configured successfully, the user can use this IP address and port to access
this camera. The external IP address is not shown in case NAT traversal function is failed.

6.1.8 Bonjour

Bonjour, also known as zero-configuration networking, enables automatic discovery of computers,
cameras, and services on IP networks. Bonjour uses industry standard IP protocols to allow
cameras to automatically discover each other without the need to enter IP addresses or configure
DNS servers. Specifically, Bonjour enables automatic IP address assignment without a DHCP
server, name to address translation without a DNS server, and service discovery without a
directory server. Bonjour is an open protocol which Apple has submitted to the IETF as part of the
ongoing standards-creation process.
31