Table of Contents
Advertisement
In addition, this camera also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your camera is located on an intranet (LAN) and you wish to make it available
from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP
traffic to an external HTTP port in the NAT router will be forwarded to the camera.
UPnP: To enable or disable the UPnP service here.
Friendly Name: To show the friendly name of this camera here.
UPnP NAT Traversal: When enabled, the camera will attempt to configure port mapping in a
NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the NAT
router first.
Port Range: The port range will open in NAT router.
External IP address: Show the IP address and port for WAN access through Internet. If
NAT traversal is configured successfully, the user can use this IP address and port to access
this camera. The external IP address is not shown in case NAT traversal function is failed.
6.1.7 Bonjour
Bonjour, also known as zero-configuration networking, enables automatic discovery of computers,
cameras, and services on IP networks. Bonjour uses industry standard IP protocols to allow
cameras to automatically discover each other without the need to enter IP addresses or configure
DNS servers. Specifically, Bonjour enables automatic IP address assignment without a DHCP
server, name to address translation without a DNS server, and service discovery without a
directory server. Bonjour is an open protocol which Apple has submitted to the IETF as part of the
25
Hide quick links:
Advertisement
Table of Contents
