Chapter 6 Using Neoware Firewall; Configuring Neoware Firewall; Introduction; Starting The Configuration Utility - Neoware c50 - Thin Client User Manual

Thin clients with microsoft windows xp embedded operating system

Hide thumbs Also See for Neoware c50 - Thin Client:

Table of Contents

Using Neoware Firewall

Starting the

Configuration

Utility

Configuring Neoware Firewall

Neoware Firewall is disabled by default. If you are using ezUpdate

and have configured your FTP server to use passive data connec-

tions, you will need to configure Neoware Firewall for passive FTP

before enabling it. Since passive FTP servers may be configured to

use a range of ports anywhere between 1024 and 65535, there is no

way of pre-configuring these ports in Neoware Firewall without

making the firewall essentially ineffective. Enabling Neoware Fire-

wall without configuring it for passive FTP will make ezUpdate fail

for those networks using passive FTP.

Neoware Firewall is configured using a utility that is accessed from

the Start menu. To run the utility, select Start > All Programs >

Neoware Firewall Configuration Utility.

The utility will display an introductory screen then a dialog listing

all the currently defined firewall filters.

Table of Contents