Changing The Filter Assignment; Editing A Filter - Neoware c50 - Thin Client User Manual

Using Neoware Firewall
Changing the Filter
Assignment

Editing a Filter

38 Configuring Neoware Firewall
Assign A check box indicating the status of the filter
(assigned or unassigned).
Filter Name The name of the firewall filter.
Action Indicates whether the filter Blocks or Permits data
flow.
Description Provides a description of what the filter does.
To change the assignment of a filter:
1 Click the check box next to any of the listed filters to change its
status (assigned or unassigned).
2
Click the Save button to make the changed setting take immedi-
ate effect.
To edit a currently defined filter:
1
Select the filter to edit by clicking on the filter line in the list of
defined filters.
2
Click the Edit button to display the Filter Properties dialog.
This is almost the same as the Add a Filter dialog (which is
described in the section "Adding a New Filter" on page 39),
except that you cannot change the filter's name or description.