Installing Or Deleting Language Packs - Neoware c50 - Thin Client User Manual

Technical Notes
Installing or
Deleting Language
Packs
28 Neoware Language Pack Installer
Be advised that when changing the default language, the best prac-
tice is to use the Neoware Language Pack Installer to effect the
change. By using this control panel applet, the Administrator, User,
and any other accounts will change the user interface to the selected
language. Note that the default keyboard, locale, and standards and
formats need to be set using the Regional and Language Options
control panel applet. Those settings are per user and are locale spe-
cific.
To install or delete a language pack:
1 Logon as Administrator.
2
If the Enhanced Write Filter is ON, it must be disabled before
continuing.
3
Click on the Start taskbar button and select Control Panel |
Neoware Language Pack Installer.
A list of available language packs should appear. Thin clients
with 512 MB or larger flash are supplied with French and Ger-
man user interface language packs for installation. By default
these are disabled and the English user interface is used.