Neoware c50 - Thin Client User Manual page 253

Keyboard Configuration
Enable NumLock on Boot
Default: Unchecked
When this option is selected, Num Lock will be activated automati-
cally when the thin client boots. (Num Lock is disabled by default to
avoid synchronization issues when connecting to some servers.)
Disable dead keys
Default: Checked
The setting of this option determines whether dead keys are enabled
or not. Dead keys are normally used to enable characters with accent
marks to be inputted. Pressing a dead key will modify the output of
the next key pressed. For example, depending on the language set-
ting, you could press a dead key then the e key to produce an "e"
with an accent mark.
Repeat Rate
This determines how quickly repeated characters are displayed when
a key is held down. To change the repeat rate between each character
(in milliseconds), drag the slider bar to the left for slower, or to the
right for faster.
Repeat Delay
This determines the time delay (in milliseconds) between pressing a
key and seeing the character displayed or its function actioned. To
change the repeat delay, drag the slider bar to the left for lower, or to
the right for higher.
General Keyboard Settings 239